You'll likely need to have a service technician examine and repair the locked-up engine. If the recoil starter spins after removing it from the engine, then the engine is locked up. Craftsman 3000-PSI Gas Pressure Washer with Briggs & Stratton Engine. Pull the recoil starter off the engine and replace the recoil starter if you can't pull the starter rope with the recoil starter off the engine. If the engine won't spin with the spark plug removed, then the piston may be bound up inside the cylinder or the recoil starter may have frozen up. Clean it if you can, otherwise replace it with a new one. Check the inlet filter for dirt or damage. If the engine starts, then it will likely run smoothly once it burns off oil inside the cylinder. Make sure the garden hose has enough water pressure and flow for the requirements of the pump. About this item Washer Pump Head For Replacement:Front vertical pressure washer pump 7/8' Shaft MAX 3000 PSI / 2. The engine may sputter and smoke when starting. Then reinstall the spark plug and try to start the engine. If it does, pull the starter rope a few more times to clear oil out of the cylinder through the spark plug hole. Remove the spark plug and then pull the starter rope to see if the engine spins. If you tipped the pressure washer on its side recently, oil may have filled the cylinder, preventing the engine from spinning. Craftsman - Gas Pressure Washer - 3000 PSI - 2.4 GPM - Red Nozzle. If the starter rope won't budge when you try to pull it, the engine may be locked up or the recoil starter may have failed. If the pressure washer engine doesn't spin as you pull out the recoil starter rope, you probably need to replace the recoil starter, because it's not spinning the flywheel.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |